Will this specific adapter work with dolphin?

Verda Turcotte asked a question: Will this specific adapter work with dolphin?
Asked By: Verda Turcotte
Date created: Fri, Jan 22, 2021 10:06 PM

Content

FAQ

Those who are looking for an answer to the question «Will this specific adapter work with dolphin?» often ask the following questions:

🐬 Will an official nintendo gamecube adapter work for dolphin?

As of 4.0-4599, Dolphin has built in support for the Nintendo GameCube controller Adapter for Wii U, the only official USB GameCube adapter available. With Dolphin's implementation, the GameCube controller is auto-configured and calibrated, with full rumble support. Wireless controllers and bongos are supported.

🐬 How to get gamecube adapter to work with dolphin?

With any necessary installation complete, run Dolphin, and check Direct Connect under GameCube Adapter in the Controller Settings, then restart Dolphin. Set GameCube ports to Standard Controller corresponding to each port on the adapter that is plugged in with the actual GameCube controller. The setup for the adapter is now completed.

🐬 How to make the gcn adapter work with dolphin?

Under the gamepad controller settings; For each controller that you want to use the adapter with, change the selection from Emulated to Gamecube Adapter. After that point, make sure to start the game with the adapter plugged in and Android will ask if you want Dolphin to have permission to use the device. Input doesn't work

Question from categories: dolphin emulator mayflash adapter converter wii usb adapter

9 other answers

Dolphin should work with both Wii U and Switch versions of the official GameCube adapter from Nintendo (which is the one from your picture) as well as with 3rd party adapters that are recognized by Super Smash Bros. for Wii U / Super Smash Bros. Ultimate when connected to a Wii U / Switch (like the Mayflash GC Controller Adapter)...

On Windows, the GameCube controller adapter will need a certain driver to let Dolphin detect it and use it. If you are using 5.0-2472 or newer, you need to either install a filter driver using Zadig or install UsbDk. (Doing both is unnecessary, but doesn't lead to any problems.) If you aren't sure which one to pick, use Zadig.

(02-02-2015, 02:55 PM) skid Wrote: If the adapter works in Super Smash Bros for Wii U on a Wii U, it will be supported on a PC by Dolphin. The Mayflash adapter in Wii U mode is supported. I can not get it to work in WiiU mode. I have to set it up like any other USB controller in PC mode.

Depends on the brand but my Mayflash adapter works flawlessly. There may be a switch on there to switch between PC and console use and you have to make sure it's set to console (might be labeled "Wii U, Switch or something similar). The PC setting will only cause problems with Dolphin. 1

Newer models of third party adapters no longer seemed to work with Dolphin. While we could recommend Nintendo's adapter or the Mayflash 4 port that we confirmed worked for Passthrough, these newer third party adapters were cheaper and becoming more common every time we looked.

Dolphin Controller Configuration. To open and manage the controller settings for Dolphin, from the Dolphin's main window, navigate to Options -> Controller Settings, or simply click the "Controllers" button. The main controller configuration window will appear, as seen in the screenshot below.

Some improvements to the GameCube USB adapter configuration process: If opening the adapter fails, unplugging and replugging it will make Dolphin try again to open it. The adapter configuration dialog will display an error message (coming from libusb) if an error occurs when opening the adapter, instead of displaying “No Adapter Detected”.

Forcing a specific adapter. If you need to use a specific adapter, instead of using the first Bluetooth adapter that is found, you can force Dolphin to use it by editing Dolphin's configuration file (Config/Dolphin.ini). In the BluetoothPassthrough section, set "VID" and "PID" to your adapter's vendor ID and product ID.

leoetlino commented on Sep 8, 2016. Yes, the pairing is currently a bit broken: it doesn't work (or it does, sometimes) the first time after starting a game, but always works after you pair it again, until the emulation is stopped or even an ES_Launch. It's weird, as it was definitely working at some point.

Your Answer

We've handpicked 20 related questions for you, similar to «Will this specific adapter work with dolphin?» so you can surely find the answer!

How to use mayflash adapter with dolphin?

Mayflash GameCube Adapter Setup For Dolphin 5.0 - 2020 - YouTube. Mayflash GameCube Adapter Setup For Dolphin 5.0 - 2020. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If playback ...

Read more

How to get gamecube adapter to work on dolphin?

With any necessary installation complete, run Dolphin, and check Direct Connect under GameCube Adapter in the Controller Settings, then restart Dolphin. Set GameCube ports to Standard Controller corresponding to each port on the adapter that is plugged in with the actual GameCube controller. The setup for the adapter is now completed.

Read more

How to make a gamecube adapter work on dolphin?

With any necessary installation complete, run Dolphin, and check Direct Connect under GameCube Adapter in the Controller Settings, then restart Dolphin. Set GameCube ports to Standard Controller corresponding to each port on the adapter that is plugged in with the actual GameCube controller. The setup for the adapter is now completed.

Read more

How to make switch gamecube adapter work on dolphin?

With any necessary installation complete, run Dolphin, and check Direct Connect under GameCube Adapter in the Controller Settings, then restart Dolphin. Set GameCube ports to Standard Controller corresponding to each port on the adapter that is plugged in with the actual GameCube controller. The setup for the adapter is now completed.

Read more

Will dolphin run on this laptop?

That same HP 8440p came with a 90w power supply (even the model without discrete graphics refuses to boot using a 65w PSU) and yet the laptop running the GPU and CPU at full blast with Throttlestop enabled only pulled ~67w from the wall, and temps always stayed in the 60s. Dolphin 5.0 CPU benchmark. CPU: Pentium G3258 @ 4.5GHz 1.23v.

Read more

How to set up mayflash adapter with dolphin?

Most videos that I saw online were from over a year ago and on older versions of Dolphin or Windows so I just made this video to remind myself of the process...

Read more

How to use gamecube adapter with dolphin emulator?

As of 4.0-4599, Dolphin has built in support for the Nintendo GameCube controller Adapter for Wii U, the only official USB GameCube adapter available.With Dolphin's implementation, the GameCube controller is auto-configured and calibrated, with full rumble support. Wireless controllers and bongos are supported.

Read more

How to use gamecube adapter with dolphin games?

With any necessary installation complete, run Dolphin, and check Direct Connect under GameCube Adapter in the Controller Settings, then restart Dolphin. Set GameCube ports to Standard Controller corresponding to each port on the adapter that is plugged in with the actual GameCube controller. The setup for the adapter is now completed.

Read more

How to use gamecube controller adapter with dolphin?

With any necessary installation complete, run Dolphin and click the GameCube controller dropdown. Select GameCube Adapter for Wii U on any slot that you wish to use the adapter for. Hitting Configure when this is selected allows you to turn rumble off/on per controller, as well as a toggle for using the DK Bongos. Adapter Not Detected

Read more

How to use wii u adapter with dolphin?

In this video, I'll show you step by step on how to use the adapt... Do you have a Wii U Gamecube controller adapter and want to use it on your PC? Now you can!

Read more

How to get gc controller adapter to work on dolphin?

Under the gamepad controller settings; For each controller that you want to use the adapter with, change the selection from Emulated to Gamecube Adapter. After that point, make sure to start the game with the adapter plugged in and Android will ask if you want Dolphin to have permission to use the device.

Read more

How well will dolphin run on this?

Dolphin emulates a console that functions very differently from a traditional PC, and uses the latest D3D and OGL features to reduce overhead. If you do not have those extensions, performance will suffer. NVIDIA: Due to the importance of the OpenGL Extension “Buffer Storage” no NVIDIA GPU before the Geforce 4xx series can be recommended.

Read more

How well will this laptop run dolphin?

That same HP 8440p came with a 90w power supply (even the model without discrete graphics refuses to boot using a 65w PSU) and yet the laptop running the GPU and CPU at full blast with Throttlestop enabled only pulled ~67w from the wall, and temps always stayed in the 60s. Dolphin 5.0 CPU benchmark. CPU: Pentium G3258 @ 4.5GHz 1.23v.

Read more

Will this surface laptop run dolphin well?

(06-11-2018, 03:33 PM) TKSilver Wrote: The i7-7660U has much better single threaded performance versus the i5-7200U.... but in all honesty unless you have a gun to your head forcing you to buy the Surface laptop, don't buy a surface laptop (if you do have a gun to your head I would still probably recommend against it.) For that kind of money there are better thin and light laptops like a razer blade 14 with a 7700HQ and 1060 under the hood (if that is too big\heavy or too hard to find in ...

Read more

Can you play dolphin emulator with switch gamecube adapter?

You need to download a small plugin to use the adaptor with dolphin. I think dolphin with tell you what it's called when you select 'GameCube controller'. Hope that helps. 1. View Entire Discussion (3 Comments)

Read more

How to connect a gamecube adapter with wii dolphin?

Do you have a Wii U Gamecube controller adapter and want to use it on your PC? Now you can! In this video, I'll show you step by step on how to use the adapt...

Read more

How to play dolphin melee with wii u adapter?

Do you have a Wii U Gamecube controller adapter and want to use it on your PC? Now you can! In this video, I'll show you step by step on how to use the adapt...

Read more

How to set up mayflash adapter with dolphin 3?

Most videos that I saw online were from over a year ago and on older versions of Dolphin or Windows so I just made this video to remind myself of the process...

Read more

How to use 3rd party gamecube adapter with dolphin?

3rd Party Gamecube Adapter. 10-01-2015, 08:30 AM. #1. Dmillz. Unregistered. I recently bought a third party gamecube adapter and was wondering what driver I should be using for it to function correctly in dolphin and how exactly I should format it within dolphin. (it has an option between wii u and pc). Any help is appreciated.

Read more

How to use dolphin with gc pc usb adapter?

With any necessary installation complete, run Dolphin and click the GameCube controller dropdown. Select GameCube Adapter for Wii U on any slot that you wish to use the adapter for. Hitting Configure when this is selected allows you to turn rumble off/on per controller, as well as a toggle for using the DK Bongos. Adapter Not Detected

Read more